Netgear DGN-2200: DSL Modem Configuration -- Old Firmware

1.Power  2.Ethernet 1-4  3.DSL Sync  4.Internet Connection(red or green)  5.WiFi on/off   6.WPS WiFi Sync
 Wireless password is located on the bottom of the modem.
 
  1. In a web browser, go to the address http://192.168.0.1
  2. Log in with username: admin password: password
  3. Choose No, I want to configure the Internet connection myself. 



    (If already logged in to the modem, you will also see this option under the Setup Wizard)


     
  4. Select Basic Settings and set the following:
    • Does the Internet Connection require a login? Yes
    • Encapsulation: PPPoE (PPP over Ethernet)
    • Login: DSL username
    • Password: DSL password
    • Service Name: Leave Blank
    • Connection Mode: Always On
    • All other settings set to automatic
    Click Apply when complete.


     
  5. Select ADSL Settings and set the following:
    • Multiplexing Method: LLC-Based
    • VPI: 0 (8 for CenturyLink/Embarq DSL circuits)
    • VCI: 35
    • DSL Mode: Auto
    Click Apply when complete.


     
  6. Select Wireless Settings and set the following:
    • Enable SSID Broadcast: Checked
    • Enable Wireless Isolation: Unchecked
    • Name (SSID): Usually user's last name (optional)
    • Channel: Auto
    • Modem: Up to 300 Mbps
    • Security Options: WPA2-PSK(AES)
    • Passphrase: Leave default! (printed on sticker on bottom of the modem)
    Click Apply when complete.


     
  7. Click Apply in the upper right corner of the screen. The modem will take 60-90 seconds to reboot.
 
Advanced Settings

Bridge Mode

To turn off the router function of the Netgear DGN2200 so you can use a 3rd party router with the modem: screenshot
  1. Select Device Mode.
  2. For Device Mode, choose: Modem Only.
Block Sites

Websites can be blocked based on keywords, and blocking can be set on a schedule using the Block Sites feature. screenshot
  1. Select Blocked Sites.
  2. Under Ketword Blocking, choose your schedule.
  3. Enter a list of keywords that you wish to block.
  4. Click Apply when complete.
 

Add Feedback