Netgear DGN-2200: Port Forwarding

Note: can not offer any technical assistance on setting up software, hardware, or VPN's with your DSL modem/router. Please refer to your product manufacturer for assistance.
If you have the older firmware, please see this article.

Accessing the router/modem


Open your web browser and go to the address

When prompted for a password, enter:
Username: admin
Password: password

Once logged in, the modem will automatically check for new firmware updates. When complete click on the advanced tab at the top of the screen



Click on Advanced Setup next.



Click on Port Forwarding/Port Triggering.



Click on Add Custom Service.



Set the Service Name, choose the service type (TCP, UDP, or Both), and add your ports. If you only need one port opened, simply add the same number as both the starting and ending ports.

Add Feedback