In order to remove the battery and reinsert the battery please follow these steps:
- Flip the device over so you can read SIERRA WIRELESS normally.
- Ensure the Overdrive Pro is not plugged into the wall outlet.
- You will see vertical lines on the top and bottom left of the device.
- Put both of your thumbs on these vertical lines and pull, or push away from the device.
- Once the back cover is off you will see the battery. You will want to slide your finger nail into the corner space of the battery and lightly pull it out.
- Once it is pulled out, wait 10 seconds.
- Line up the 4 gold bars on the battery and the 4 gold prongs on the Overdrive Pro and reinsert the battery, ensuring the Sierra Wireless logo is on top and the gold contacts line up with with pins inside the device.
- Slide the back panel back on and power on the device.
Article ID: 406, Created: 10/22/2013 at 2:51 PM, Modified: 7/1/2014 at 4:18 PM